Tuya ZigBee Smart Gateway Homekit Wired Hub Remote Control Bridge Smart Life Automation Work with Apple Home Kit

Specification:

Size: 78x78x25MM

Storage temperature: 10C-55

Working temperature: 10C-55

Working humidity: 10%-90% RU

Storage humidity: 10%-90% RH

Firmware upgrade: OTA support

Network protocol: Zigbee IEEE 802.15.4

USB power supply: 5V/1A（Power adapter not included）

Model Number: Homekit ZigBee Gateway Hub 3.0 Gateway Hub

Product type: Wired gateway(Needs to be connected to the network through the Ethernet Port.)

NOTE:

1.  None of the options supports Bluetooth.

2. Option 1 (HomeKit Wired Hub)

Supports both HomeKit and ZigBee protocols.

This device cannot be directly connected to WiFi(Needs to be connected to the network through the Ethernet Port).

This is a dual-purpose gateway, which can be used as a ZigBee Hub to connect with TUYA APP, or as a HomeKit Hub to connect with Apple Home APP.

If you want your smart device to connect to Apple Home APP through this Gateway/Hub, you need to make sure your smart device supports HomeKit authentication protocol.

This Hub is compatible with ZigBee smart devices when using TUYA APP.

When using the Apple Home APP, you can add HomeKit-certified Zigbee devices to the gateway.  When using the TUYA APP, Most Zigbee devices can be added to the gateway.  Only one APP can be used at the same time, so one must choose between ''''Apple Home APP'''' and ''''TUYA APP''''.

Only HomeKit certified smart devices can be added to the Apple Home APP.Therefore, you cannot connect an uncertified TUYA smart device to the Apple Home APP through this HomeKit Hub.

3.  Option 2 (ZigBee Wired Hub)

Does not support HomeKit protocol.

This device cannot be directly connected to WiFi(Needs to be connected to the network through the Ethernet Port).

4.  Power adapter not included.

Steps to add HomeKit child device(Homekit Accessories):

Add and manage sub-devices

1. Sub-device additions

（1）Long press the reset button of sub-device to make the sub-device enter the standby state (the indicator lights on).

（2）Short press the gateway reset button to make the gateway enter the sub-device adding state (steady blue, flashing purple).

（3）Devices will be automatically added to the gateway.  After the addition, the icon of sub-devices will appear in the APP (sub-devices will be in the room of the gateway by default after being added)

2.  Sub-device settings

Long press the sub-device icon to enter Settings

3.  Remove child device

Since there is no option to directly remove the sub-device in the HomeKit gateway in the Apple Home APP, it is necessary to remove the sub-device from the TUYA APP, and the Apple Home APP will remove it synchronously.